2022 Specialized Stumpjumper Pro
Very low miles - only 22 months old. Bike is essentially like new. $4,500
Specialized's Pro-level complete bike package built on the same FACT11m frame used used by the S-Works model
Frame: SJ S-Works FACT 11m carbon chassis and rear-end, asymmetrical design, 130mm travel, 29 Trail Geometry, SWAT? Door integration, flip chip Head Tube/Bottom Bracket adjustment, BSC threaded BB, fully enclosed internal cable routing, 12x148mm TA dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger.
Color: Gloss Oasis
Rear Shock: FOX FLOAT DPS Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment w/ Open Mode Adjustment, 190x45mm
Fork: FOX FLOAT 34 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, 140mm of travel
Drivetrain: SRAM 12-speed 1x Eagle AXS X01/X1
Crankset: SRAM X1 Carbon w/ X-Sync2 30T ring, DUB BSC 73mm BB
Rear Derailleur: Eagle X01 AXS
Shift Levers: Eagle AXS Rocker Paddle
Cassette: XG-1295 Eagle, 10-52T
Chain: Eagle X01
Brakeset: SRAM G2 RSC, 4-piston caliper, hydraulic disc; Rotors- 200mm Front, 180mm Rear
Cockpit
Handlebar: Roval Traverse SL Carbon Riser, Black: 35mm diameter, 780mm width, 8? backsweep, 6? upsweep, 30mm rise
Stem: Deity Copperhead, 35mm bar clamp
Grips: Deity Knuckleduster, Black
Saddle: Bridge Comp, Black; Hollow Ti rails
Seatpost: Bike Yoke Dropper, Revive Max, 34.9mm diameter
Wheelset
Roval Traverse Carbon 29, hookless carbon, 30mm (IRW), setup tubeless, DT350 Disc Hub 15x110mm TA spacing, 28h, DT Competition Race Spokes
Tires: Front- Butcher GRID, GRIPTON T9, 29x2.3"; Rear- Purgatory, GRIPTON T7, 29x2.3" w/Presta valve tubes
IMG_4696.jpgIMG_4693.jpgIMG_4697.jpgIMG_4698.jpgIMG_4694.jpg
Reply With Quote